Sbus<N>:A429:Source - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SBUS<n>:A429:SOURce
Command Syntax
:SBUS<n>:A429:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:A429:SOURce command sets the source of the ARINC 429
signal.
Query Syntax
:SBUS<n>:A429:SOURce?
The :SBUS<n>:A429:SOURce? query returns the currently set source of the
ARINC 429 signal.
Use the :TRIGger:LEVel:HIGH and :TRIGger:LEVel:LOW commands to set
the thresold levels for the selected source.
Return Format
<source><NL>
See Also •
•
•
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":TRIGger:LEVel:HIGH"
":TRIGger:LEVel:LOW"
":TRIGger:MODE" on page 944
":SBUS<n>:MODE" on page 649
":SBUS<n>:A429:TRIGger:TYPE"
":SBUS<n>:A429:SIGNal"
":SBUS<n>:A429:SPEed"
":SBUS<n>:A429:FORMat"
"Introduction to :TRIGger Commands"
on page 942
on page 943
on page 666
on page 658
on page 660
on page 657
on page 935
28
:SBUS<n> Commands
659