Sbus<N>:Usb:trigger:pid:data - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:TRIGger:PID:DATA
Command Syntax
:SBUS<n>:USB:TRIGger:PID:DATA <pid>
<pid> ::= {DATA0 | DATA1 | DATA2 | MDATa}
The :SBUS<n>:USB:TRIGger:PID:DATA command specifies the USB data
PID to trigger on for the selected bus.
The specified PID does not include the PID check value, which is specified
using the :SBUS<n>:USB:TRIGger:PIDCheck command.
The DATA USB trigger mode can be selected using the
:SBUS<n>:USB:TRIGger command.
Query Syntax
:SBUS<n>:USB:TRIGger:PID:DATA?
The :SBUS<n>:USB:TRIGger:PID:DATA? query returns the specified data
PID.
Return Format
<pid><NL>
<pid> ::= {DATA0 | DATA1 | DATA2 | MDAT}
See Also
•
•
810
(see page 1208)
":SBUS<n>:USB:TRIGger:PCHeck"
":SBUS<n>:USB:TRIGger"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 809
on page 800