:SBUS<n>:USB:TRIGger:PID:HANDshake
Command Syntax
:SBUS<n>:USB:TRIGger:PID:HANDshake <pid>
<pid> ::= {ACK | NAK | STALL | NYET}
The :SBUS<n>:USB:TRIGger:PID:HANDshake command specifies the USB
handshake PID to trigger on for the selected bus.
The specified PID does not include the PID check value, which is specified
using the :SBUS<n>:USB:TRIGger:PIDCheck command.
The HANDshake USB trigger mode can be selected using the
:SBUS<n>:USB:TRIGger command.
Query Syntax
:SBUS<n>:USB:TRIGger:PID:HANDshake?
The :SBUS<n>:USB:TRIGger:PID:HANDshake? query returns the specified
handshake PID.
Return Format
<pid><NL>
<pid> ::= {ACK | NAK | STALL | NYET}
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see
page
1208)
":SBUS<n>:USB:TRIGger:PCHeck"
":SBUS<n>:USB:TRIGger"
on page 809
on page 800
28
:SBUS<n> Commands
811