Sbus<N>:A429:Speed - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:A429:SPEed
Command Syntax
:SBUS<n>:A429:SPEed <speed>
<speed> ::= {LOW | HIGH}
The :SBUS<n>:A429:SPEed command specifies the signal speed:
• LOW — 12.5 kb/s.
• HIGH — 100 kb/s.
Query Syntax
:SBUS<n>:A429:SPEed?
The :SBUS<n>:A429:SPEed? query returns the current ARINC 429 signal
speed setting.
Return Format
<speed><NL>
<speed> ::= {LOW | HIGH}
Errors •
See Also
•
•
•
•
•
660
(see page 1208)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE" on page 649
":SBUS<n>:A429:SIGNal"
":SBUS<n>:A429:FORMat"
":SBUS<n>:A429:SOURce"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1169
on page 645
on page 658
on page 657
on page 659