:POWer:INRush:NEXT
Command Syntax
:POWer:INRush:NEXT
The :POWer:INRush:NEXT command goes to the next step of the inrush
current analysis.
This command is equivalent to pressing the Next softkey on the
oscilloscope front panel when prompted during the analysis.
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see
page
1208)
":POWer:INRush:APPLy"
":POWer:INRush:EXIT"
on page 565
on page 566
25
:POWer Commands
567