Search:serial:can:mode - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:SERial:CAN:MODE

Command Syntax
:SEARch:SERial:CAN:MODE <value>
<value> ::= {DATA | IDData | IDEither | IDRemote | ALLerrors
The :SEARch:SERial:CAN:MODE command selects the type of CAN
information to find in the Lister display:
• DATA - searches for CAN Data frames matching the specified ID, Data,
• IDData - searches for CAN frames matching the specified ID of a Data
• IDEither - searches for the specified ID, regardless if it is a Remote
• IDRemote - searches for CAN frames matching the specified ID of a
• ALLerrors - searches for CAN active error frames and unknown bus
• OVERload - searches for CAN overload frames.
• ERRor - searches for CAN Error frame.
Query Syntax
:SEARch:SERial:CAN:MODE?
The :SEARch:SERial:CAN:MODE? query returns the currently selected
mode.
Return Format
<value><NL>
<value> ::= {DATA | IDD | IDE | IDR | ALL | OVER | ERR}
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
| OVERload | ERRor}
and the DLC (Data length code).
frame.
frame or a Data frame.
Remote frame.
conditions.
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:SERial:CAN:PATTern:DATA"
":SEARch:SERial:CAN:PATTern:ID"
:SEARch Commands
on page 850
on page 852
29
849