Power:slew:source - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

25
:POWer Commands

:POWer:SLEW:SOURce

(see page 1208)
Command Syntax
:POWer:SLEW:SOURce <source>
<source> ::= {V | I}
The :POWer:SLEW:SOURce command selects either the voltage source or
the current source as the source for the slew rate analysis.
Query Syntax
:POWer:SLEW:SOURce?
The :POWer:SLEW:SOURce query returns the selected source for the slew
rate analysis.
Return Format
<source><NL>
<source> ::= {V | I}
See Also
• ":POWer:SLEW:APPLy" on page 600
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 601