:SBUS<n>:USB:TRIGger:PID:TOKen
Command Syntax
:SBUS<n>:USB:TRIGger:PID:TOKen <pid>
<pid> ::= {OUT | IN | SETup | SOF}
The :SBUS<n>:USB:TRIGger:PID:TOKen command specifies the USB token
PID to trigger on for the selected bus.
The specified PID does not include the PID check value, which is specified
using the :SBUS<n>:USB:TRIGger:PIDCheck command.
The TOKen USB trigger mode can be selected using the
:SBUS<n>:USB:TRIGger command.
Query Syntax
:SBUS<n>:USB:TRIGger:PID:TOKen?
The :SBUS<n>:USB:TRIGger:PID:TOKen? query returns the specified token
PID.
Return Format
<pid><NL>
<pid> ::= {OUT | IN | SETup | SOF}
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see
page
1208)
":SBUS<n>:USB:TRIGger:PCHeck"
":SBUS<n>:USB:TRIGger"
on page 809
on page 800
28
:SBUS<n> Commands
813