11
:COMPliance Commands
:COMPliance:USB:SOURce:ADJacent
Command Syntax
:COMPliance:USB:SOURce:ADJacent <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :COMPliance:USB:SOURce:ADJacent command specifies the analog
input channel that is probing the adjacent D+ or D- signal.
When the Device Full Speed Signal Quality test is selected, the specified
channel probes the adjacent D+ signal.
When the Device Low Speed Signal Quality test is selected, this specified
channel probes the adjacent D- signal.
Query Syntax
:COMPliance:USB:SOURce:ADJacent?
The :COMPliance:USB:SOURce:ADJacent? query returns the specified
analog input channel.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also
•
•
286
(see
page
1208)
":COMPliance:USB:SOURce:DPLus"
":COMPliance:USB:SOURce:DMINus"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 289
on page 288