Dvm:source - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:DVM:SOURce

Command Syntax
:DVM:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 in NR1 format
The :DVM:SOURce command sets the select the analog channel on which
digital voltmeter (DVM) measurements are made.
The selected channel does not have to be on (displaying a waveform) in
order for DVM measurements to be made.
Query Syntax
:DVM:SOURce?
The :DVM:SOURce? query returns the selected DVM input source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
<n> ::= 1-2 or 1-4 in NR1 format
See Also •
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":DVM:ENABle" on page 326
":DVM:MODE" on page 328
":DVM:ARANge" on page 324
":DVM:CURRent" on page 325
":DVM:FREQuency" on page 327
15
:DVM Commands
329