Search:serial:m1553:Pattern:data - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:SERial:M1553:PATTern:DATA

Command Syntax
:SEARch:SERial:M1553:PATTern:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1}
The :SEARch:SERial:M1553:PATTern:DATA command specifies the
additional 11 bits when searching for the MIL- STD- 1553 Remote Terminal
Address + 11 Bits.
Query Syntax
:SEARch:SERial:M1553:PATTern:DATA?
The :SEARch:SERial:M1553:PATTern:DATA? query returns the current value
setting for the additional 11 bits.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 | 1}
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:SERial:M1553:MODE" on page 880
29
:SEARch Commands
881