Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 1175

Agilent InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
38
Status Reporting
Status Reporting Data Structures
Status Byte Register (STB)
Service Request Enable Register (SRE)
Trigger Event Register (TER)
Output Queue
Message Queue
(Standard) Event Status Register (ESR)
(Standard) Event Status Enable Register (ESE)
Error Queue
Operation Status Event Register (:OPERegister[:EVENt])
Operation Status Condition Register (:OPERegister:CONDition)
Arm Event Register (AER)
Overload Event Register (:OVLRegister)
Hardware Event Event Register (:HWERegister[:EVENt])
Hardware Event Condition Register (:HWERegister:CONDition)
Mask Test Event Event Register (:MTERegister[:EVENt])
Clearing Registers and Queues
Status Reporting Decision Chart
IEEE 488.2 defines data structures, commands, and common bit
definitions for status reporting (for example, the Status Byte Register and
the Standard Event Status Register). There are also instrument- defined
structures and bits (for example, the Operation Status Event Register and
the Overload Event Register).
An overview of the oscilloscope's status reporting structure is shown in
the following block diagram. The status reporting structure allows
monitoring specified events in the oscilloscope. The ability to monitor and
report these events allows determination of such things as the status of an
operation, the availability and reliability of the measured data, and more.
1177
1179
1182
1183
1184
1187
1190
1195
1196
s1
1181
1185
1186
1188
1189
1191
1192
1193
1194
1175