Sbus<N>:Spi:source:frame - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SBUS<n>:SPI:SOURce:FRAMe
Command Syntax
:SBUS<n>:SPI:SOURce:FRAMe <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:SPI:SOURce:FRAMe command sets the frame source when
:SBUS<n>:SPI:FRAMing is set to CHIPselect or NOTChipselect.
Query Syntax
:SBUS<n>:SPI:SOURce:FRAMe?
The :SBUS<n>:SPI:SOURce:FRAMe? query returns the current frame source
for the SPI serial frame.
Return Format
<source><NL>
See Also •
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :TRIGger Commands"
":SBUS<n>:SPI:SOURce:CLOCk"
":SBUS<n>:SPI:SOURce:MOSI"
":SBUS<n>:SPI:SOURce:MISO"
":SBUS<n>:SPI:FRAMing"
on page 935
on page 760
on page 763
on page 762
on page 759
28
:SBUS<n> Commands
761