11
:COMPliance Commands
:COMPliance:USB:SOURce:DMINus
Command Syntax
:COMPliance:USB:SOURce:DMINus <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :COMPliance:USB:SOURce:DMINus command specifies the analog input
channel that is probing the D- signal.
On 4- channel oscilloscopes, you are forced to use different channel pairs
for the D+ and D- signals. This provides the maximum sample rate.
(Channels 1 and 2 are one pair and channels 3 and 4 are the other pair.)
Query Syntax
:COMPliance:USB:SOURce:DMINus?
The :COMPliance:USB:SOURce:DMINus? query returns the specified analog
input channel.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also
•
•
288
(see
page
1208)
":COMPliance:USB:SOURce:DPLus"
":COMPliance:USB:SOURce:ADJacent"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 289
on page 286