36
Obsolete and Discontinued Commands
:MEASure:TMAX
Command Syntax
:MEASure:TMAX [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1 to (# analog channels) in NR1 format
The :MEASure:TMAX command installs a screen measurement and starts
an X- at- Max- Y measurement on the selected waveform. If the optional
source is specified, the current source is modified.
The :MEASure:TMAX command is obsolete and is provided for backward compatibility to
N O T E
previous oscilloscopes. Use the :MEASure:XMAX command (see
Query Syntax
:MEASure:TMAX? [<source>]
The :MEASure:TMAX? query returns the horizontal axis value at which the
maximum vertical value occurs on the current source. If the optional
source is specified, the current source is modified. If all channels are off,
the query returns 9.9E+37.
Return Format
<value><NL>
<value> ::= time at maximum in NR3 format
See Also
•
•
•
•
1140
(see
page
1208)
"Introduction to :MEASure Commands"
":MEASure:TMIN"
on page 1141
":MEASure:XMAX"
on page 482
":MEASure:XMIN"
on page 483
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
page
482) instead.
on page 420