Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 399

:MARKer:XDELta
Query Syntax
:MARKer:XDELta?
The MARKer:XDELta? query returns the value difference between the
current X1 and X2 cursor positions.
Xdelta = (Value at X2 cursor) - (Value at X1 cursor)
X cursor units are set by the :MARKer:XUNits command.
If the front-panel cursors are off, the marker position values are not defined. Make sure to
N O T E
set :MARKer:MODE to MANual or WAVeform to put the cursors in the front-panel Normal
mode.
Return Format
<value><NL>
<value> ::= difference value in NR3 format.
See Also
•
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :MARKer Commands"
":MARKer:MODE" on page 394
":MARKer:X1Position"
":MARKer:X2Position"
":MARKer:X1Y1source"
":MARKer:X2Y2source"
":MARKer:XUNits" on page 400
on page 392
on page 395
on page 397
on page 396
on page 398
20
:MARKer Commands
399