Sbus<N>:Usb:trigger:frame - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:TRIGger:FRAMe
(see page 1208)
Command Syntax
:SBUS<n>:USB:TRIGger:FRAMe <string>
<string> ::= "nnnnnnnnnnn" where n ::= {0 | 1 | X}
<string> ::= "0xnnn" where n ::= {0,..,9 | A,..,F | X | $}
The :SBUS<n>:USB:TRIGger:FRAMe command specifies the 11- bit Frame
portion of the trigger for the selected bus, in binary or hex.
Query Syntax
:SBUS<n>:USB:TRIGger:FRAMe?
The :SBUS<n>:USB:TRIGger:FRAMe? query returns the specified Frame
portion of the trigger.
Return Format
<string><NL>
<string> ::= "nnnnnnnnnnn" where n ::= {0 | 1 | X}
See Also • ":SBUS<n>:USB:TRIGger:PID:TOKen" on page 813
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 807