Sbus<N>:Usb:trigger:seu - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:TRIGger:SEU
Command Syntax
:SBUS<n>:USB:TRIGger:SEU <string>
<string> ::= "nn" where n ::= {0 | 1 | X}
<string> ::= "0xn" where n ::= {0 | 1 | 2 | 3 | X | $}
The :SBUS<n>:USB:TRIGger:SEU command specifies the 2- bit S and E or U
portion of the trigger for the selected bus, in binary or hex.
Query Syntax
:SBUS<n>:USB:TRIGger:SEU?
The :SBUS<n>:USB:TRIGger:SEU? query returns the specified S and E or U
portion of the trigger.
Return Format
<string><NL>
<string> ::= "nn" where n ::= {0 | 1 | X}
See Also •
816
(see page 1208)
":SBUS<n>:USB:TRIGger:PID:SPECial"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 812