Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 204

6
Root (:) Commands
:HWERegister[:EVENt] (Hardware Event Event Register)
Query Syntax
:HWERegister[:EVENt]?
The :HWERegister[:EVENt]? query returns the integer value contained in
the Hardware Event Event Register.
Table 74 Hardware Event Event Register
Bit
15-13
12
11-0
Return Format
<value><NL>
<value> ::= integer in NR1 format.
See Also
•
•
•
•
•
•
•
•
204
(see page 1208)
Name Description
--- ---
PLL PLL Locked
Locked
--- ---
"Introduction to Root (:) Commands"
":CHANnel<n>:PROTection"
":OPEE (Operation Status Enable Register)"
":OPERegister:CONDition (Operation Status Condition Register)"
page 211
":OVLenable (Overload Event Enable Register)"
":OVLRegister (Overload Event Register)"
"*STB (Read Status Byte)"
"*SRE (Service Request Enable)"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
When Set (1 = High = True), Indicates:
(Not used.)
This bit is for internal use and is not intended
for general use.
(Not used.)
on page 190
on page 278
on page 209
on page 217
on page 182
on page 180
on
on page 215