Function<M>:Bus:yunits - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

17
:FUNCtion<m> Commands
:FUNCtion<m>:BUS:YUNits
Command Syntax
:FUNCtion<m>:BUS:YUNits <units>
<m> ::= 1-4 in NR1 format
<units> ::= {VOLT | AMPere | NONE}
The :FUNCtion<m>:BUS:YUNits command specifies the vertical units for
the Chart Logic Bus operations.
Query Syntax
:FUNCtion<m>:BUS:YUNits?
The :FUNCtion<m>:BUS:YUNits query returns the Chart Logic Bus vertical
units.
Return Format
<units><NL>
<units> ::= {VOLT | AMP | NONE}
See Also •
346
(see page 1208)
":FUNCtion<m>:OPERation"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 358