System:lock - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

30
:SYSTem Commands

:SYSTem:LOCK

Command Syntax
:SYSTem:LOCK <value>
<value> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:LOCK command disables the front panel. LOCK ON is the
equivalent of sending a local lockout message over the programming
interface.
Query Syntax
:SYSTem:LOCK?
The :SYSTem:LOCK? query returns the lock status of the front panel.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
•
914
(see page 1208)
"Introduction to :SYSTem Commands"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 910