Wmemory<R>:Save - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

35
:WMEMory<r> Commands
:WMEMory<r>:SAVE
Command Syntax
:WMEMory<r>:SAVE <source>
<r> ::= 1 to (# ref waveforms) in NR1 format
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
The :WMEMory<r>:SAVE command copies the analog channel or math
function waveform to the specified reference waveform location.
Only ADD or SUBtract math operations can be saved as reference waveforms.
N O T E
See Also
•
•
1104
(see page 1208)
Chapter 35, ":WMEMory<r> Commands," starting on page 1099
":WMEMory<r>:DISPlay"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1102