29
:SEARch Commands
:SEARch:TRANsition:SOURce
Command Syntax
:SEARch:TRANsition:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:TRANsition:SOURce command selects the channel on which
to search for edge transitions.
Query Syntax
:SEARch:TRANsition:SOURce?
The :SEARch:TRANsition:SOURce? query returns the current transition
search source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also
•
•
•
840
(see
page
1208)
Chapter
29, ":SEARch Commands," starting on page 817
":SEARch:MODE"
on page 820
":SEARch:TRANsition:SLOPe"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 839