Wmemory<R>:Yscale - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

35
:WMEMory<r> Commands
:WMEMory<r>:YSCale
Command Syntax
:WMEMory<r>:YSCale <scale>[<suffix>]
<r> ::= 1 to (# ref waveforms) in NR1 format
<scale> ::= vertical units per division in NR3 format
<suffix> ::= {V | mV}
The :WMEMory<r>:YSCale command sets the vertical scale, or units per
division, of the selected reference waveform.
Legal values for the scale are copied from the original source waveform
(that is, the analog channel or math function waveform that was originally
saved as a reference waveform).
Query Syntax
:WMEMory<r>:YSCale?
The :WMEMory<r>:YSCale? query returns the current scale setting for the
specified reference waveform.
Return Format
<scale><NL>
<scale> ::= vertical units per division in NR3 format
See Also •
•
•
•
•
1108
(see page 1208)
Chapter 35, ":WMEMory<r> Commands," starting on page 1099
":WMEMory<r>:DISPlay"
":WMEMory<r>:YOFFset"
":WMEMory<r>:YRANge"
":WMEMory<r>:SKEW"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1102
on page 1106
on page 1107
on page 1105