Wgen<W>:Arbitrary:data:dac - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:WGEN<w>:ARBitrary:DATA:DAC
Command Syntax
:WGEN<w>:ARBitrary:DATA:DAC {<binary> | <value>, <value> ...}
<w> ::= 1 or 2 in NR1 format
<binary> ::= decimal 16-bit integer values between -512 to +511
<value> ::= decimal integer values between -512 to +511
The :WGEN<w>:ARBitrary:DATA:DAC command downloads an arbitrary
waveform using 16- bit integer (DAC) values.
See Also •
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
in IEEE 488.2 binary block format
in comma-separated NR1 format
":WGEN<w>:ARBitrary:DATA"
":SAVE:ARBitrary[:STARt]"
":RECall:ARBitrary[:STARt]"
on page 1060
on page 624
on page 615
:WGEN<w> Commands
1063
34