Search:serial:usb:pid:data - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:SERial:USB:PID:DATA

Command Syntax
:SEARch:SERial:USB:PID:DATA <pid>
<pid> ::= {DATA0 | DATA1 | DATA2 | MDATa}
The :SEARch:SERial:USB:PID:DATA command specifies the USB data PID
to find.
The DATA USB search mode can be selected using the
:SEARch:SERial:USB:MODE command.
Query Syntax
:SEARch:SERial:USB:PID:DATA?
The :SEARch:SERial:USB:PID:DATA? query returns the specified data PID.
Return Format
<pid><NL>
<pid> ::= {DATA0 | DATA1 | DATA2 | MDAT}
See Also
•
902
(see page 1208)
":SEARch:SERial:USB:MODE"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 893