Wgen<W>:Arbitrary:store - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:WGEN<w>:ARBitrary:STORe
Command Syntax
:WGEN<w>:ARBitrary:STORe <source>
<w> ::= 1 or 2 in NR1 format
<source> ::= {CHANnel<n> | WMEMory<r> | FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
<m> ::= 1-4 in NR1 format
The :WGEN<w>:ARBitrary:STORe command stores the source's waveform
into the arbitrary waveform memory.
See Also •
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":WGEN<w>:ARBitrary:DATA"
":WGEN<w>:ARBitrary:DATA:DAC"
":SAVE:ARBitrary[:STARt]"
":RECall:ARBitrary[:STARt]"
on page 1060
on page 1063
on page 624
on page 615
:WGEN<w> Commands
1065
34