Sbus<N>:Usb:trigger:data - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:TRIGger:DATA
(see page 1208)
Command Syntax
:SBUS<n>:USB:TRIGger:DATA <string>
<string> ::= "nnnn..." where n ::= {0 | 1 | X}
<string> ::= "0xn..." where n ::= {0,..,9 | A,..,F | X | $}
The :SBUS<n>:USB:TRIGger:DATA command specifies the Data portion of
the trigger for the selected bus, in binary or hex.
See the :SBUS<n>:USB:TRIGger:DATA:LENGth command for setting the
length of the data value.
Query Syntax
:SBUS<n>:USB:TRIGger:DATA?
The :SBUS<n>:USB:TRIGger:DATA? query returns the specified Data
portion of the trigger.
Return Format
<string><NL>
<string> ::= "nnnn..." where n ::= {0 | 1 | X}
See Also
• ":SBUS<n>:USB:TRIGger:DATA:LENGth" on page 804
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 803