Function<M>:Bus:clock - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

17
:FUNCtion<m> Commands
:FUNCtion<m>:BUS:CLOCk
Command Syntax
:FUNCtion<m>:BUS:CLOCk <source>
<m> ::= 1-4 in NR1 format
<source> ::= {DIGital<d>}
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :FUNCtion<m>:BUS:CLOCk command selects the clock signal source for
the Chart Logic Bus State operation.
Query Syntax
:FUNCtion<m>:BUS:CLOCk?
The :FUNCtion<m>:BUS:CLOCk query returns the source selected for the
clock signal.
Return Format
<source><NL>
<source> ::= {DIGital<d>}
<d> ::= 0 to (# digital channels - 1) in NR1 format
See Also
•
342
(see page 1208)
":FUNCtion<m>:OPERation"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 358