Save:image:format - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SAVE:IMAGe:FORMat

Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {{BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is
currently selected.
See Also •
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:FACTors"
":SAVE:IMAGe:INKSaver"
":SAVE:IMAGe:PALette"
":SAVE:WAVeform:FORMat"
on page 623
on page 627
on page 628
on page 630
on page 631
on page 639
27
:SAVE Commands
629