Search:serial:usb:pid:handshake - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:SERial:USB:PID:HANDshake

(see page 1208)
Command Syntax
:SEARch:SERial:USB:PID:HANDshake <pid>
<pid> ::= {ACK | NAK | STALL | NYET}
The :SEARch:SERial:USB:PID:HANDshake command specifies the USB
handshake PID to find.
The HANDshake USB search mode can be selected using the
:SEARch:SERial:USB:MODE command.
Query Syntax
:SEARch:SERial:USB:PID:HANDshake?
The :SEARch:SERial:USB:PID:HANDshake? query returns the specified
handshake PID.
Return Format
<pid><NL>
<pid> ::= {ACK | NAK | STALL | NYET}
See Also • ":SEARch:SERial:USB:MODE" on page 893
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 903