Wmemory<R>:Clear - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:WMEMory<r>:CLEar
Command Syntax
:WMEMory<r>:CLEar
<r> ::= 1 to (# ref waveforms) in NR1 format
The :WMEMory<r>:CLEar command clears the specified reference waveform
location.
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 35, ":WMEMory<r> Commands," starting on page 1099
":WMEMory<r>:SAVE"
":WMEMory<r>:DISPlay"
on page 1104
on page 1102
:WMEMory<r> Commands
35
1101