25
:POWer Commands
:POWer:ONOFf:EXIT
Command Syntax
:POWer:ONOFf:EXIT
The :POWer:ONOFf:EXIT command exits (stops) the turn on time/turn off
time analysis.
This command is equivalent to pressing the Exit softkey on the oscilloscope
front panel during the analysis.
See Also
•
•
•
572
(see
page
1208)
":POWer:ONOFf:APPLy"
":POWer:ONOFf:NEXT"
":POWer:ONOFf:TEST"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 571
on page 573
on page 574