Function<M>:Linear:gain - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

17
:FUNCtion<m> Commands
:FUNCtion<m>:LINear:GAIN
(see page 1208)
Command Syntax
:FUNCtion<m>:LINear:GAIN <value>
<m> ::= 1-4 in NR1 format
<value> ::= 'A' in Ax + B, value in NR3 format
The :FUNCtion<m>:LINear:GAIN command specifies the 'A' value in the Ax
+ B operation.
Query Syntax
:FUNCtion<m>:LINear:GAIN?
The :FUNCtion<m>:LINear:GAIN query returns the gain value.
Return Format
<value><NL>
<value> ::= 'A' in Ax + B, value in NR3 format
See Also
• ":FUNCtion<m>:OPERation" on page 358
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 355