25
:POWer Commands
:POWer:ONOFf:TEST
Command Syntax
:POWer:ONOFf:TEST {{0 | OFF} | {1 | ON}}
The :POWer:ONOFf:TEST command selects whether turn on or turn off
analysis is performed:
• ON — Turn On — measures the time taken to get the output voltage of
• OFF — Turn Off — measures the time taken for the output voltage of
Query Syntax
:POWer:ONOFf:TEST?
The :POWer:ONOFf:TEST query returns the selected test type.
Return Format
{0 | 1}
See Also
•
•
•
574
(see
page
1208)
the power supply after the input voltage is applied.
the power supply to turn off after the input voltage is removed.
":POWer:ONOFf:APPLy"
":POWer:ONOFf:EXIT"
":POWer:ONOFf:NEXT"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 571
on page 572
on page 573