Power:transient:iinitial - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

25
:POWer Commands

:POWer:TRANsient:IINitial

Command Syntax
:POWer:TRANsient:IINitial <value>[suffix]
<value> ::= Initial current value in NR3 format
[suffix] ::= {A | mA}
The :POWer:TRANsient:IINitial command to specify the initial load current
value. The initial load current will be used as a reference and to trigger
the oscilloscope.
Query Syntax
:POWer:TRANsient:IINitial?
The :POWer:TRANsient:IINitial query returns the initial load current value.
Return Format
<value><NL>
<value> ::= Initial current value in NR3 format
See Also •
•
•
•
•
610
(see page 1208)
":POWer:SIGNals:VSTeady:TRANsient"
":POWer:TRANsient:APPLy"
":POWer:TRANsient:EXIT"
":POWer:TRANsient:INEW"
":POWer:TRANsient:NEXT"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 597
on page 608
on page 609
on page 611
on page 612