External:bwlimit - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

16
:EXTernal Trigger Commands

:EXTernal:BWLimit

Command Syntax
:EXTernal:BWLimit <bwlimit>
<bwlimit> ::= {0 | OFF}
The :EXTernal:BWLimit command is provided for product compatibility.
The only legal value is 0 or OFF. Use the :TRIGger:HFReject command to
limit bandwidth on the external trigger input.
Query Syntax
:EXTernal:BWLimit?
The :EXTernal:BWLimit? query returns the current setting of the low- pass
filter (always 0).
Return Format
<bwlimit><NL>
<bwlimit> ::= 0
See Also
•
•
•
332
(see page 1208)
"Introduction to :EXTernal Trigger Commands"
"Introduction to :TRIGger Commands"
":TRIGger:HFReject" on page 939
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 331
on page 935