Search:serial:can:pattern:id - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:SERial:CAN:PATTern:ID

Command Syntax
:SEARch:SERial:CAN:PATTern:ID <string>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
The :SEARch:SERial:CAN:PATTern:ID command specifies the ID value when
searching for a CAN event.
The value can be a standard ID or an extended ID, depending on the
:SEARch:SERial:CAN:PATTern:ID:MODE command's setting.
Query Syntax
:SEARch:SERial:CAN:PATTern:ID?
The :SEARch:SERial:CAN:PATTern:ID? query returns the current ID value
setting.
Return Format
<string><NL>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
See Also •
•
•
852
(see page 1208)
for hexadecimal
for hexadecimal
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:SERial:CAN:MODE"
":SEARch:SERial:CAN:PATTern:ID:MODE"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 849
on page 853