Measure:ppulses - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:MEASure:PPULses

Command Syntax
:MEASure:PPULses [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:PPULses command installs a rising pulse count
measurement on screen. If the optional source parameter is not specified,
the current source is measured.
This command is not available if the source is FFT (Fast Fourier Transform).
N O T E
Query Syntax
:MEASure:PPULses? [<source>]
The :MEASure:PPULses? query measures and returns the on- screen rising
pulse count.
Return Format
<value><NL>
<value> ::= the rising pulse count in NR3 format
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :MEASure Commands"
":MEASure:SOURce"
on page 420
on page 458
21
:MEASure Commands
449