:SEARch:RUNT:POLarity
Command Syntax
:SEARch:RUNT:POLarity <slope>
<polarity> ::= {POSitive | NEGative | EITHer}
The :SEARch:RUNT:POLarity command sets the polarity for the runt
search.
Query Syntax
:SEARch:RUNT:POLarity?
The :SEARch:RUNT:POLarity? query returns the currently set runt polarity.
Return Format
<slope><NL>
<polarity> ::= {POS | NEG | EITH}
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see
page
1208)
Chapter
29, ":SEARch Commands," starting on page 817
":SEARch:MODE"
on page 820
":SEARch:RUNT:SOURce"
on page 835
29
:SEARch Commands
833