Measure:statistics:reset - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

21
:MEASure Commands

:MEASure:STATistics:RESet

Command Syntax
:MEASure:STATistics:RESet
This command resets the measurement statistics, zeroing the counts.
Note that the measurement (statistics) configuration is not deleted.
See Also •
•
•
•
•
Example Code •
464
(see page 1208)
"Introduction to :MEASure Commands"
":MEASure:STATistics"
":MEASure:STATistics:DISPlay"
":MEASure:RESults" on page 452
":MEASure:STATistics:INCRement"
"Example Code" on page 452
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 420
on page 460
on page 461
on page 462