Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 301

Control all oscilloscope functions associated with individual digital
channels. See
Table 88 :DIGital<d> Commands Summary
Command
:DIGital<d>:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 303)
:DIGital<d>:LABel
<string> (see
page 304)
:DIGital<d>:POSition
<position> (see
page 305)
:DIGital<d>:SIZE
<value> (see
page 306)
:DIGital<d>:THReshold
<value>[suffix] (see
page 307)
Introduction to
<d> ::= 0 to (# digital channels - 1) in NR1 format
:DIGital<d>
Commands
Agilent InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
13
:DIGital<d> Commands
"Introduction to :DIGital<d> Commands"
Query
:DIGital<d>:DISPlay?
(see page 303)
:DIGital<d>:LABel?
(see page 304)
:DIGital<d>:POSition?
(see page 305)
:DIGital<d>:SIZE?
(see page 306)
:DIGital<d>:THReshold
? (see page 307)
s1
on page 301.
Options and Query Returns
<d> ::= 0 to (# digital channels
- 1) in NR1 format
{0 | 1}
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<string> ::= any series of 10 or
less ASCII characters enclosed in
quotation marks
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<position> ::= 0-7 if display
size = large, 0-15 if size =
medium, 0-31 if size = small
Returns -1 when there is no space
to display the digital waveform.
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<value> ::= {SMALl | MEDium |
LARGe}
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<value> ::= {CMOS | ECL | TTL |
<user defined value>}
<user defined value> ::= value in
NR3 format from -8.00 to +8.00
[suffix] ::= {V | mV | uV}
301