Function<M>:Linear:offset - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

17
:FUNCtion<m> Commands
:FUNCtion<m>:LINear:OFFSet
Command Syntax
:FUNCtion<m>:LINear:OFFSet <value>
<m> ::= 1-4 in NR1 format
<value> ::= 'B' in Ax + B, value in NR3 format
The :FUNCtion<m>:LINear:OFFSet command specifies the 'B' value in the
Ax + B operation.
Query Syntax
:FUNCtion<m>:LINear:OFFSet?
The :FUNCtion<m>:LINear:OFFSet query returns the offset value.
Return Format
<value><NL>
<value> ::= 'B' in Ax + B, value in NR3 format
See Also
•
356
(see page 1208)
":FUNCtion<m>:OPERation"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 358