29
:SEARch Commands
:SEARch:RUNT:TIME
Command Syntax
:SEARch:RUNT:TIME <time>[suffix]
<time> ::= floating-point number in NR3 format
[suffix] ::= {s | ms | us | ns | ps}
When searching for runt pulses whose widths are greater than or less than
a time (see :SEARch:RUNT:QUALifier), the :SEARch:RUNT:TIME command
specifies the time value.
Query Syntax
:SEARch:RUNT:TIME?
The :SEARch:RUNT:TIME? query returns the currently specified runt time
value.
Return Format
<time><NL>
<time> ::= floating-point number in NR3 format
See Also
•
•
836
(see
page
1208)
Chapter
29, ":SEARch Commands," starting on page 817
":SEARch:RUNT:QUALifier"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 834