28
:SBUS<n> Commands
:SBUS<n>:A429:TRIGger:TYPE
Command Syntax
:SBUS<n>:A429:TRIGger:TYPE <condition>
<condition> ::= {WSTArt | WSTOp | LABel | LBITs | PERRor | WERRor
The :SBUS<n>:A429:TRIGger command sets the ARINC 429 trigger on
condition:
• WSTArt — triggers on the start of a word.
• WSTOp — triggers at the end of a word.
• LABel — triggers on the specified label value.
• LBITs — triggers on the label and the other word fields as specified.
• LRANge — triggers on a label within a min/max range.
• PERRor — triggers on words with a parity error.
• WERRor — triggers on an intra- word coding error.
• GERRor — triggers on an inter- word gap error.
• WGERrors — triggers on either a Word or Gap Error.
• ALLerrors — triggers on any of the above errors.
• ABITs — triggers on any bit, which will therefore form an eye diagram.
• AZBits — triggers on any bit with a value of zero.
• AOBits — triggers on any bit with a value of one.
Query Syntax
:SBUS<n>:A429:TRIGger:TYPE?
The :SBUS<n>:A429:TRIGger:TYPE? query returns the current ARINC 429
trigger on condition.
Return Format
<condition><NL>
<condition> ::= {WSTA | WSTO | LAB | LBIT | PERR | WERR | GERR | WGER
Errors
•
See Also
•
•
•
•
•
•
•
666
(see
page
1208)
| GERRor | WGERrors | ALLerrors | LRANge | ABITs
| AOBits | AZBits}
| ALL | LRAN | ABIT | AOB | AZB}
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE"
on page 649
":SBUS<n>:A429:TRIGger:LABel"
":SBUS<n>:A429:TRIGger:PATTern:DATA"
":SBUS<n>:A429:TRIGger:PATTern:SDI"
":SBUS<n>:A429:TRIGger:PATTern:SSM"
":SBUS<n>:A429:TRIGger:RANGe"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1169
on page 645
on page 661
on page 662
on page 663
on page 664
on page 665