32
:TRIGger Commands
:TRIGger:TV:UDTV:HTIMe
Command Syntax
:TRIGger:TV:UDTV:HTIMe <time>
<time> ::= seconds in NR3 format
When the Generic video trigger's horizontal sync control is enabled, the
:TRIGger:TV:UDTV:HTIMe command sets the minimum time the horizontal
sync pulse must be present to be considered valid.
Query Syntax
:TRIGger:TV:UDTV:HTIMe?
The :TRIGger:TV:UDTV:HTIMe query returns the horizontal sync time
setting.
Return Format
<time><NL>
<time> ::= seconds in NR3 format
See Also
•
•
1010
(see
page
1208)
":TRIGger:TV:STANdard"
":TRIGger:TV:UDTV:HSYNc"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1007
on page 1009