Power:enable - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

25
:POWer Commands

:POWer:ENABle

Command Syntax
:POWer:ENABle {{0 | OFF} | {1 | ON}}
The :POWer:ENABle command enables or disables power analysis.
Query Syntax
:POWer:ENABle?
The :POWer:ENABle query returns a 1 or a 0 showing whether power
analysis is enabled or disabled, respectively.
Return Format
{0 | 1}
See Also
•
554
(see page 1208)
Chapter 22, ":MEASure Power Commands," starting on page 485
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide