Power:harmonics:display - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:POWer:HARMonics:DISPlay

Command Syntax
:POWer:HARMonics:DISPlay <display>
<display> ::= {TABLe | BAR | OFF}
The :POWer:HARMonics:DISPlay command specifies how to display the
current harmonics analysis results:
• TABLe
• BAR — Bar chart.
• OFF — Harmonics measurement results are not displayed.
Query Syntax
:POWer:HARMonics:DISPlay?
The :POWer:HARMonics:DISPlay query returns the display setting.
Return Format
<display><NL>
<display> ::= {TABL | BAR | OFF}
See Also •
•
•
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":POWer:HARMonics:APPLy"
":POWer:HARMonics:DATA"
":POWer:HARMonics:FAILcount"
":POWer:HARMonics:LINE"
":POWer:HARMonics:POWerfactor"
":POWer:HARMonics:RUNCount"
":POWer:HARMonics:STANdard"
":POWer:HARMonics:STATus"
":POWer:HARMonics:THD"
on page 555
on page 556
on page 558
on page 559
on page 560
on page 561
on page 562
on page 563
on page 564
25
:POWer Commands
557