Save:compliance:usb[:Start] - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SAVE:COMPliance:USB[:STARt]

Command Syntax
:SAVE:COMPliance:USB[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:COMPliance:USB[:STARt] command saves USB 2.0 signal quality
test results to a file.
If a file extension is provided as part of a specified <file_name>, it must be ".html".
N O T E
See Also •
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 626
":SAVE:PWD" on page 636
Chapter 11, ":COMPliance Commands," starting on page 283
:SAVE Commands
on page 623
27
625