Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 419

Table 96 :MEASure Commands Summary (continued)
Command
:MEASure:VRATio
[<interval>][,<source
1>] [,<source2>] (see
page 477)
:MEASure:VRMS
[<interval>]
[,<type>][,<source>]
(see page 478)
n/a
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Query
:MEASure:VRATio?
[<interval>][,<source
1>] [,<source2>] (see
page 477)
:MEASure:VRMS?
[<interval>]
[,<type>][,<source>]
(see page 478)
:MEASure:VTIMe?
<vtime>[,<source>]
(see page 479)
:MEASure Commands
Options and Query Returns
<interval> ::= {CYCLe | DISPlay}
<source1,2> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= the ratio
value in dB in NR3 format
<interval> ::= {CYCLe | DISPlay}
<type> ::= {AC | DC}
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= calculated dc
RMS voltage in NR3 format
<vtime> ::= displayed time from
trigger in seconds in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion<m> |
MATH<m> | WMEMory<r>} for MSO
models
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= voltage at the
specified time in NR3 format
21
419